PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.4.4_Configuration_Guide (Special Release)
All content
Space settings
Content
Results will update as you type.
•
Release Notes for PICOS 4.4.4 (Special Release)
Hardware Guides
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
VLAN Configuration Commands
Layer 3 Routing Commands
Voice VLAN Configuration Commands
ACL Configuration Commands
QoS Configuration Commands
Protocol Configuration Commands
IP Multicast Commands
•
OpenFlow Commands in CrossFlow Mode
VXLAN Commands
BGP EVPN Commands
PoE Configuration Commands
VRRP Commands
Spanning Tree Protocol Commands
MLAG Commands
GRE Tunnel Interface Commands
GVRP Commands
MVRP Commands
ERPS Commands
EFM OAM Commands
Interface Configuration Commands
Loopback Detection Commands
•
set protocols loopback-detection enable
•
set protocols loopback-detection interface enable
•
set protocols loopback-detection message-interval
•
set protocols loopback-detection traceoptions configuration disable
•
set protocols loopback-detection traceoptions all disable
•
run show loopback-detection
•
run clear loopback-detection interface
PICOS Open vSwitch Configuration Guide
PICOS Open vSwitch Command Reference
Troubleshooting Guide
Blogs
You‘re viewing this with anonymous access, so some content might be blocked.
Close
PICOS-4.4.4_Configuration_Guide (Special Release)
/
Loopback Detection Commands
Loopback Detection Commands
Tracy Yang
Owned by
Tracy Yang
May 24, 2024
Loading data...
Copyright © 2025 Pica8 Inc. All Rights Reserved.
{"serverDuration": 9, "requestCorrelationId": "64723398a1f141a2b2f79894be3e2bb4"}