Routing and Forwarding Table

Check the Software and Hardware Route Tables

To display the hardware host route table, use the show route forward-host ipv4 all command in L2/L3 operation mode.

admin@Switch> show route forward-host ipv4 all
Address HWaddress Port 
--------------- ----------------- ---------
10.10.3.2 48:6E:73:02:03:DA ge-1/1/48
Total host count:1

To display the hardware route table, use the show route forward-route ipv4 all command in L2/L3 operation mode.

admin@Switch> show route forward-route ipv4 all
Destination          NextHopMac          Port    
---------------      -----------------   ---------
10.10.3.0/24         48:6E:73:02:04:64   connected
101.101.101.0/24     48:6E:73:02:03:DA   ge-1/1/48
102.102.102.0/24     48:6E:73:02:03:DA   ge-1/1/48
Total route count:4

To display the software route table, use the show route ipv4 command in L2/L3 operation mode.

admin@Switch> show route ipv4

If PicOS is running in OVS mode, check the software and hardware flow tables.