Routing and Forwarding Table
Check the Software and Hardware Route Tables
To display the hardware host route table, use the show route forward-host ipv4 all command in L2/L3 operation mode.
admin@Switch> show route forward-host ipv4 all Address HWaddress Port --------------- ----------------- --------- 10.10.3.2 48:6E:73:02:03:DA ge-1/1/48 Total host count:1
To display the hardware route table, use the show route forward-route ipv4 all command in L2/L3 operation mode.
admin@Switch> show route forward-route ipv4 all Destination NextHopMac Port --------------- ----------------- --------- 10.10.3.0/24 48:6E:73:02:04:64 connected 101.101.101.0/24 48:6E:73:02:03:DA ge-1/1/48 102.102.102.0/24 48:6E:73:02:03:DA ge-1/1/48 Total route count:4
To display the software route table, use the show route ipv4 command in L2/L3 operation mode.
admin@Switch> show route ipv4
If PicOS is running in OVS mode, check the software and hardware flow tables.
Copyright © 2024 Pica8 Inc. All Rights Reserved.