N3208PX-ON


Front Panel Schematic

(1) System Status LED

(2) Power Status LED

(3) FAN Status LED

(4) System Beacon LED

(5) Console port

(6) Management Ethernet port

(7) 4 x 1G RJ45 ports

(8) 4x5G RJ45 ports

(9) 2x10G SPF+ ports

(10) USB port

 (11) Reset button

-

Rear Panel Schematic

(1) PSU1

(2) FAN1

-


Switch System Characteristics

Mechanical dimension

Standard 1U chassis height

Management port

1

RJ45 Console port

1

1G RJ45 port

4

5G RJ45 port

4

10G SPF+ port

2

Power LED

1

System Status LED

1

FAN Status LED

1

System Beacon LED

1

USB port

1

Reset button

1

PSU

1

FRU (Fan Removable Unit)

1

Working environment temperature

0ºC~70ºC

 

*UPoE

  • The first eight RJ45 ports, from ge-1/1/1 to ge-1/1/8, on the front panel support UPoE. For these UPoE ports, the maximum output power supported is up to 90 watts. For details about UPoE, please refer to UPoE.
  • See the link PoE Configuration Commands for PoE command reference, the following two PoE commands are not supported on N3208PX-ON:

set poe interface {<interface-name> | allmax-power <integer>

set poe power management-mode <value>

1G/2.5G/5G RJ45 Port

The four 1G/2.5G/5G RJ45 ports, ge-1/1/5, ge-1/1/6, ge-1/1/7 and ge-1/1/8, don’t support setting of the force speed by using set interface gigabit-ethernet<interface-name> speed <speed> command, but only supports auto-negotiation mode. Together with the optional set interface gigabit-ethernet <interface-name> auto-speeds <auto-speed> command, user can manually specify the auto-negotiation rate range.

Copyright © 2024 Pica8 Inc. All Rights Reserved.