N3208PX-ON
Front Panel Schematic
(1) System Status LED | (2) Power Status LED | (3) FAN Status LED |
(4) System Beacon LED | (5) Console port | (6) Management Ethernet port |
(7) 4 x 1G RJ45 ports | (8) 4x5G RJ45 ports | (9) 2x10G SPF+ ports |
(10) USB port | (11) Reset button | - |
Rear Panel Schematic
(1) PSU1 | (2) FAN1 | - |
Switch System Characteristics
Mechanical dimension | Standard 1U chassis height |
Management port | 1 |
RJ45 Console port | 1 |
1G RJ45 port | 4 |
5G RJ45 port | 4 |
10G SPF+ port | 2 |
Power LED | 1 |
System Status LED | 1 |
FAN Status LED | 1 |
System Beacon LED | 1 |
USB port | 1 |
Reset button | 1 |
PSU | 1 |
FRU (Fan Removable Unit) | 1 |
Working environment temperature | 0ºC~70ºC |
*UPoE
- The first eight RJ45 ports, from ge-1/1/1 to ge-1/1/8, on the front panel support UPoE. For these UPoE ports, the maximum output power supported is up to 90 watts. For details about UPoE, please refer to UPoE.
- See the link PoE Configuration Commands for PoE command reference, the following two PoE commands are not supported on N3208PX-ON:
set poe interface {<interface-name> | all} max-power <integer>
set poe power management-mode <value>
1G/2.5G/5G RJ45 Port
The four 1G/2.5G/5G RJ45 ports, ge-1/1/5, ge-1/1/6, ge-1/1/7 and ge-1/1/8, don’t support setting of the force speed by using set interface gigabit-ethernet<interface-name> speed <speed> command, but only supports auto-negotiation mode. Together with the optional set interface gigabit-ethernet <interface-name> auto-speeds <auto-speed> command, user can manually specify the auto-negotiation rate range.
Copyright © 2024 Pica8 Inc. All Rights Reserved.