Rapid PVST+ Configuration Example
- Tracy Yang
Owned by Tracy Yang
Jul 18, 2024
4 min read
Loading data...
The following topology is an example of a rapid-PVST+ configuration. Switches A and B are in the aggregation layer, and switches C and D are in the access layer. Configure switch A as the root bridge of VLAN 100 and VLAN 200, switch B as the root bridge of VLAN 300, and switch C as the root bridge of VLAN 400. 
Figure 4-11. PVST configuration.
Configuring Switch A
For Switch A, configure ge-1/1/1~ge-1/1/3 as trunk ports; ge-1/1/1 as a member of VLANs 100, 200, 300, and 400; ge-1/1/2 as a member of VLANs 200 and 300; and ge-1/1/3 as a member of VLANs 100 and 200.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set vlans vlan-id 300 admin@XorPlus# set vlans vlan-id 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree force-version 4 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To verify that Switch A is the root bridge of VLANs 100 and 200, configure VLANs 100 and 200 as the higher priority.
admin@XorPlus# set protocols spanning-tree pvst vlan 100 bridge-priority 0 admin@XorPlus# set protocols spanning-tree pvst vlan 200 bridge-priority 0 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch B
Configure ge-1/1/1~ge-1/1/3 as trunk ports, and ge-1/1/1 as a member of VLANs 100, 200, 300, and 400; ge-1/1/2 as a member of VLANs 100 and 200; and ge-1/1/3 as a member of VLANs 200 and 300.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set vlans vlan-id 300 admin@XorPlus# set vlans vlan-id 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree force-version 4 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To verify that Switch B is the root bridge of VLAN 300, configure VLAN 300 as the higher priority.
admin@XorPlus# set protocols spanning-tree pvst vlan 300 bridge-priority 0 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch C
Configure ge-1/1/1~ge-1/1/3 as trunk ports; ge-1/1/1 as a member of VLANs 200 and 400; ge-1/1/2 as a member of VLANs 100 and 200; and ge-1/1/3 as a member of VLANs 100 and 200.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set vlans vlan-id 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree force-version 4 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To verify that Switch C is the root bridge of VLAN 400, configure VLAN 400 as the higher priority.
admin@XorPlus# set protocols spanning-tree pvst vlan 400 bridge-priority 0 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch D
Configure ge-1/1/1~ge-1/1/3 as trunk ports; ge-1/1/1 as a member of VLANs 200 and 400; ge-1/1/2 as a member of VLANs 200 and 300; and ge-1/1/3 as a member of VLANs 200 and 300.
admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set vlans vlan-id 300 admin@XorPlus# set vlans vlan-id 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree force-version 4 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Copyright © 2024 Pica8 Inc. All Rights Reserved.