set protocols snmp rmon alarm interval

Owned by Tracy Yang
Jul 18, 2024
1 min read

The set protocols snmp rmon alarm interval command configures the sampling interval of RMON alarm.

The delete protocols snmp rmon alarm command deletes the configuration. Users need to delete the RMON alarm entry to remove this configuration.


Command Syntax

set protocols snmp rmon alarm <entry-index> interval <interval>

delete protocols snmp rmon alarm <entry-index>


Parameters

Parameter

Description

alarm <entry-index>

Specifies the RMON alarm table index. The value is an integer that ranges from 1 to 65535.

interval <interval>

Specifies the sampling interval for RMON alarm. The value is an integer, in seconds, that ranges from 10 to 3600.


Example

  • Configure the sampling interval of RMON alarm to 20 seconds.
admin@PICOS# set protocols snmp rmon alarm 1 interval 20
admin@PICOS# commit



Copyright © 2024 Pica8 Inc. All Rights Reserved.