The set protocols snmp rmon alarm rising-event-index command configures the event to fire when the alarm rising threshold is crossed.

The delete protocols snmp rmon alarm command deletes the configuration. Users need to delete the RMON alarm entry to remove this configuration.

Command Syntax

set protocols snmp rmon alarm <entry-index> rising-event-index <alarmRisingEventIndex>

delete protocols snmp rmon alarm <entry-index>

Parameters

Parameter

Description

alarm <entry-index>

Specifies the RMON alarm table index. The value is an integer that ranges from 0 to 65535.

rising-event-index <alarmRisingEventIndex>

Specifies the event to fire when the alarm rising threshold is crossed. The value is an integer that is configured in command set protocols snmp rmon event <entry-index> XX.

When configured to 0, it indicates no event has been specified, so no action will be taken when the alarm threshold is exceeded.

Example

Configure the event to fire when the rising threshold is crossed.

admin@PICOS# set protocols snmp rmon alarm 1 rising-event-index 5
admin@PICOS# commit

Browser not supported