set routing route-map set-action src

The set routing route-map set-action src command sets the preferred source address for matching routes when installing in the kernel.
The delete routing route-map set-action src command restores the default behavior of not modifying the source address of the route entry.

Command Syntax

set routing route-map <route-map-name> order <NUMBER> set-action src {ipv4-addr <ipv4-address>| ipv6-addr <ipv6-address>}

delete routing route-map <route-map-name> order <NUMBER> set-action src {ipv4-addr <ipv4-address>| ipv6-addr<ipv6-address>}

Parameter

Example

•  Configure a action clause in the route map to modify the source address of the route:

admin@Xorplus# set routing route-map GlobalMap order 10 set-action src ipv4-addr 100.100.100.1
admin@Xorplus# commit