set routing route-map set-action src
The set routing route-map set-action src command sets the preferred source address for matching routes when installing in the kernel.
The delete routing route-map set-action src command restores the default behavior of not modifying the source address of the route entry.
Command Syntax
set routing route-map <route-map-name> order <NUMBER> set-action src {ipv4-addr <ipv4-address>| ipv6-addr <ipv6-address>}
delete routing route-map <route-map-name> order <NUMBER> set-action src {ipv4-addr <ipv4-address>| ipv6-addr<ipv6-address>}
Parameter
Parameter | Description |
route-map <route-map-name> | Specifies the name of the route map. Required. |
order <NUMBER> | Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535. |
src {ipv4-addr <ipv4-address>| ipv6-addr <ipv6-address>} | Specifies the preferred source address to be set for a route. |
Example
- Configure a action clause in the route map to modify the source address of the route:
admin@Xorplus# set routing route-map GlobalMap order 10 set-action src ipv4-addr 100.100.100.1 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.