Configuring the Routing

Owned by Tracy Yang
Nov 18, 2024
1 min read

Routing is a process of forwarding packets from one network to a destination address in another network. The implement of route selection and packet forwarding is based on various routes stored in the routing table. To maintain the routing table, you can manually add or configure different routing protocols.

The switch supports direct routing, static routing and dynamic routing.

  • Direct routing: discovered by a data link layer protocol.

  • Static routing: manually configured.

  • Dynamic routing: discovered by a dynamic routing protocol.

It includes the following chapters:

 

Copyright © 2024 Pica8 Inc. All Rights Reserved.