PICOS System Configuration Guide
- Tracy Yang
Owned by Tracy Yang
Nov 18, 2024
Loading data...
- Getting Started
- Quick Configuration Guide
- Installing or Upgrading PICOS
- ONIE Version and BIOS/U-Boot Information of Verified Platforms
- Installing PICOS on Bare Metal Switches
- Upgrading PICOS from Version 4.0.0 or Later Using Upgrade Command
- Upgrading PICOS from Version 3.0 or Later Using Upgrade2
- Installing Debian Packages on PICOS
- PICOS Installation and Upgrade Guide for FS S5810 Series, S3410 Series, S5860 Series and N8560-32C Switches
- Upgrading PICOS for FS S5810/S5860 Series Switches Using Upgrade Command (Login via Console Port)
- Upgrading PICOS by Using Upgrade2 for S5860-20SQ/S5860-24XB-U and S3410 Series Switches (Login via Console Port)
- Installing PICOS for FS S5810/S5860 Series and N8560-32C Switches
- Installing PICOS for FS S3410 Series Switches
- Upgrading PICOS for FS S5810/S5860 Series Switches Using Upgrade Command (Login via Eth0 or Inband Management Interface)
- Upgrading PICOS by Using Upgrade2 for S5860-20SQ/S5860-24XB-U and S3410 Series Switches (Login via Eth0 or Inband Management Interface)
- PICOS Debian Package Upgrade User Guide
- Zero Touch Provisioning (ZTP)
- PICOS Licenses
- PICOS Mode Selection
- PICOS Password Recovery
- Setting Date and Time
- Boot Diagnosis Report
- Rebooting the System
- Auto-Run Script Upon System Boot Up
- Sample for Crossflow OVS Remarking Rules with Auto-run Script
- Graceful Bootup with Backup Configuration
- IP Rule of Management Network and Service Network
- Display System EEPROM Data Block
- Manual File Backup
- PICOS Monitor
- Enable Web-based Management Interface
- Linux command: ssh/scp/ping/traceroute/apt-get/telnet
Copyright © 2024 Pica8 Inc. All Rights Reserved.