set protocols snmp v3 group security-level

The set protocols snmp v3 group security-level command configure the security level of an SNMP group.

When the security-level of a group is AuthNoPriv or AuthPriv,the user in that group should be configured with Authentication-mode, Authentication-key even as well as privacy-mode and privacy-key.

Command Syntax

set protocols snmp v3 group <group-name> security-level <AuthNoPriv | AuthPriv | NoAuthNoPriv>

delete protocols snmp v3 group <group-name> security-level

Parameter

Parameter

Description

group <group-name>

Specifies the name of an SNMP group. The value is a string.

security-level <AuthNoPriv | AuthPriv | NoAuthNoPriv>

Specifies the security level of the SNMP group. The value could be AuthNoPriv, AuthPriv or NoAuthNoPriv.

AuthNoPriv: authenticates SNMP messages without encryption.
AuthPriv: authenticates and encrypts SNMP messages.
NoAuthNoPriv: does not authenticate or encrypt SNMP messages.

Example

•This example configures group1 to AuthPriv.

admin@XorPlus# set protocols snmp v3 group group1 security-level AuthPriv 
admin@XorPlus# commit