set protocols evpn mh neigh-holdtime

Run the command set protocols evpn mh neigh-holdtime to configure the neighbor entry hold time in seconds. The device will maintain the SYNC neighbor entries during this time after the ES peer's EVPN type-2 route is deleted. The device independently  tries to establish reachability with the MAC/host on the local ES during this time period.

Run the command delete protocols evpn mh neigh-holdtime to delete this configuration and revert back to the default value which is 1080 seconds.

Note: This is a global EVPN MH configuration and affects the whole device.

Command Syntax

set protocols evpn mh neigh-holdtime <seconds>

delete protocols evpn mh neigh-holdtime 

Parameter

Example

• Configure the EVPN MH neighbor entry hold time to 234 seconds.