set interface aggregate-ethernet evpn mh es-sys-mac

Run the command set interface aggregate-ethernet evpn mh es-sys-mac to configure the EVPN multi-homing Ethernet Segment System MAC address on a given aggregate Ethernet interface.

Run the command delete set interface aggregate-ethernet evpn mh es-sys-mac to delete this configuration from the switch.

Command Syntax

set interface aggregate-ethernet <aggregate-ethernet> evpn mh es-sys-mac <system-mac>

delete interface aggregate-ethernet <aggregate-ethernet> evpn mh es-sys-mac

Parameter

Parameter	Description
aggregate-ethernet <aggregate-ethernet>	Specifies the aggregate Ethernet interface, the value is a string, e.g. ae1.
es-sys-mac <system-mac>	Specifies the Ethernet segment system MAC address, the value is in 48 bit hexadecimal MAC address format, e.g. 00:22:22:22:22:22

Example

Configure the EVPN multi-homing Ethernet segment system MAC for interface ae1.

admin@Xorplus# set interface aggregate-ethernet ae1 evpn mh es-sys-mac 00:22:22:22:22:22
admin@Xorplus# commit