Uploading and Pushing Images

AmpCon-Campus provides multiple built-in PicOS images, which you can use to deploy switches.

To deploy a switch with a PicOS image that is not built in AmpCon-Campus, upload the image and its MD5 file first before you deploy the switch.

Prerequisite

Click Service > Switch Model in the AmpCon-Campus UI, and check whether the PicOS image to deploy is listed in the Deployed ONIE Image drop-down list.

• If the image is not listed there, upload the PicOS image and its MD5 file to AmpCon-Campus as described in the Uploading Images section.

• If the image is listed there, you don’t need to upload the PicOS image and its MD5 file.

Uploading Images

To upload a PicOS image, follow these steps:

1. In the AmpCon-Campus UI, click Resource > Upgrade Management.

2. Click Upload.

3. In the pop-up window, upload an image by using one of the following ways:

• Click File, and select a local image file (required) and its MD5 file (optional).

Open

• Click Link, and enter the image URL (required) and the MD5 file URL (optional).

Open

• Click Latest, and check the image files that you want to upload.

3. Click Upload.

Optional: Uploading MD5 Files

An MD5 file is used to verify the completeness of the corresponding PicOS image. If the MD5 file is not uploaded when you upload the PicOS image, AmpCon-Campus will not verify the completeness of the PicOS image when it installs the PicOS image.

To upload an MD5 file for a PicOS image, follow these steps:

1. In the AmpCon-Campus UI, click Resource > Upgrade Management.

2. In the Software list, locate the PicOS image, and then click Upload Md5.

3. Upload the MD5 file by using either of the following ways:

• Click File, and select the MD5 file.

• Click Link, and enter the URL of the MD5 file.

4. Click Upload.

Optional: Removing Images

1. In the AmpCon-Campus UI, click Resource > Upgrade Management.

2. In the Software list, locate an image, and then click Delete.

3. Click Yes to confirm the deletion.

Optional: Pushing Images

You can push PicOS images to one or multiple switches. The pushed images are located in the /home/automation directory.

To push a PicOS image to a single switch, follow these steps:

1. In the AmpCon-Campus UI, click Resource > Upgrade Management.

2. In the Software list, select the PicOS image that you want to push.

3. In the Switch list, locate the switch, and then click Push Image.

To push a PicOS image to multiple switches, follow these steps:

1. In the AmpCon-Campus UI, click Resource > Upgrade Management.

2. In the Software list, select the PicOS image that you want to push.

3. In the Switch list, select the corresponding switches, and then click Push Image.