set interface gigabit-ethernet ether-options 802.3ad

The set interface gigabit-ethernet ether-options 802.3ad command adds a specified port to a LAG.

Command Syntax
set interface gigabit-ethernet <interface-name> ether-options 802.3ad <lag-interface-name>
delete interface gigabit-ethernet <interface-name> ether-options 802.3ad

Parameter

Parameter

Description

gigabit-ethernet <interface-name>

Specifies the ethernet switching port identifier which will be added to the LAG interface.

<lag-interface-name>

Specifies the name of the LAG interface. The value is a string in the format of aex.

Note:

The maximum LAGs per switch is limited by the interface capacity.

NOTE:

The maximum number of member ports per LAG is platform dependent, for details see /wiki/spaces/PicOS44sp/pages/4293424.

Example
• This example is to add ge-1/1/3 to ae1:

admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 ether-options 802.3ad ae1
admin@XorPlus#commit