run show poe power

The run show poe power command displays the PoE power status.

Note:

On AS4610-30P, AS4610-54P, AS4630-54PE, AS4625-54P and AS4630-54NPE,

• If Power Management mode is dynamic, total power allocated is about the same value as realtime consumption.
• But if Power Management mode  is static, total power allocated is usually larger than realtime consumption.

On other PoE supported switches, regardless of whether Power Management mode is dynamic or static, the total power allocated is about the same value as realtime consumption.

Example

•  Displays the PoE power status.

On AS4610-30P, AS4610-54P, AS4630-54PE, AS4625-54P, AS4630-54NPE, S5860-24XB-U, S5810-48TS-P, S5860-24MG-U, S5860-48XMG-U, S3410C-8TMS-P and S3410-48TS-P:

admin@XorPlus# run show poe power
Total power allocated           RealTime consumption     Power available   Power Mode    PSU1 Status    PSU2 Status 
------------------------------------------------------------------------------------------------------------------------
2.20W                           2.20W                     675.00W         redundant       Powered on          Present but powered off

On other PoE supported switches:

root@Xorplus# run show poe power 
Consumption Power  Calculated Power  Available Power   PSU1 Status            PSU2 Status 
-------------------------------------------------------------------------------------------------------------
0W                   0W                950W            Not present            Powered on 

Table 1 Description of the run show poe power command output