run show ospf border-routers

Run the command run show ospf border-routers to display OSPF ABRs and ASBRs.

If OSPF is running in multiple VRFs then add the VRF parameter to the command to display ABRs and ASBRs within a particular VRF.

Command Syntax

run show ospf [vrf <vrf-name>] border-routers

Example

•  Display ABRs and ASBRs in VRF vrf1.

admin@switch1# run show ospf vrf vrf1 border-routers
VRF Name: vrf1
============ OSPF router routing table =============
R    3.3.3.3               [10] area: 1.1.1.1, ASBR
                           via 11.251.201.4, vlan11