set protocols ospf area

Run the command set protocols ospf area to define an OSPF area. Optional parameter vrf can be used to specify a VRF, if no VRF is specified the command takes effect on the default VRF. The optional keyword no-summary can be used to disable injecting inter-area summaries into the specified stub area. The no-summary option makes the area totally stubby.

To configure the area type, run the command set protocols ospf area area-type.

The command delete protocols ospf area can be used to remove this configuration.

Command Syntax

set protocols ospf [vrf <vrf-name>] area {<ipv4>|<0-4294967295>} [no-summary}

delete protocols ospf [vrf <vrf-name>] area {<ipv4>|<0-4294967295>} [no-summary]

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies the name of the VRF for the OSPF instance.
area {<ipv4>\|<0-4294967295>}	Specify OSPF area, the value could be in IPv4 dotted decimal format or an integer ranging from 0 to 4294967295.
no-summary	Optional. Keyword to disable injecting inter-area summaries into the specified stub area.

Example

Configure area 1.1.1.1 in VRF BLUE and disable injecting inter-area summaries into this area.

admin@XorPlus# set protocols ospf vrf BLUE area 1.1.1.1 no-summary
admin@Xorplus# commit

PICOS-4.0_Configuration_Guide

set protocols ospf area

Related content