The set routing route-map match source-protocol command matches the source routing protocol value of the route with the value configured in the match clause.
The delete routing route-map match source-protocol command restores the default behavior of not matching the source routing protocol value of the route.

Command Syntax

Parameter

Parameter	Description
route-map <route-map-name>	Specifies the name of the route map. Required.
order <NUMBER>	Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535.
source-protocol <bgp\|connected\|kernel\|ospf\|ospf6\|static\|system>	Specifies the bgp, connected, ospf, kernel, system or static value to be matched with the route entry source protocol.

Example

Configure a match clause in the route map to match the source routing protocol value:

admin@Xorplus# set routing route-map GlobalMap order 10 match source-protocol bgp
admin@Xorplus# set routing route-map GlobalMap order 10 matching-policy permit
admin@Xorplus# commit

Browser not supported