The set routing route-map match ipv4-addrnext-hop command matches the next-hop address prefix length or prefix list of the routes.
The delete routing route-map match ipv4-addr next-hop command restores the default behavior of not matching the next-hop address prefix length or prefix list of the routes.

Command Syntax

set routing route-map <route-map-name> order <NUMBER> match ipv4-addr next-hop {prefix-len <prefix-len>|prefix-list <prefix-list-v4>}

delete routing route-map <route-map-name> order <NUMBER> match ipv4-addr next-hop {prefix-len <prefix-len>|prefix-list <prefix-list-v4>}

Parameter

Parameter	Description
route-map <route-map-name>	Specifies the name of the route map. Required.
order <NUMBER>	Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535.
prefix-len <prefix-len>	Specifies the prefix length to be matched. The value is an integer that ranges from 0 to 32.
prefix-list <prefix-list-v4>	Specifies the name of the prefix list to be matched.

Example

Configure a match clause in the route map to match the next hop prefix length of the routes.

admin@Xorplus# set routing route-map GlobalMap order 10 match ipv4-addr next-hop prefix-len 24
admin@Xorplus# commit

Browser not supported