set protocols vrrp interface vrid simple-key
The set protocols vrrp interface vrid authentication simple-key command configures the authentication key in simple authentication mode for a VRRP group.
NOTE: VRRP authentication is only supported by VRRPv2, which is not supported by VRRPv3. |
Command Syntax
set protocols vrrp interface <interface-name> vrid <virtual-router-id> authentication simple-key <simple-key>
Parameter
Parameter | Description |
interface <interface-name> | Specifies the Layer 3 interface name of VRRP device. The value could be the VLAN interface name, the routed interface or the sub-interface name. The value is a string. |
vrid <virtual-router-id> | Specifies the VRID of a VRRP group. The value is an integer that ranges from 1 to 254. |
authentication simple-key <simple-key> | Specifies the authentication key in simple authentication mode. The value is a string of 1 to 8 case-sensitive characters without spaces. |
Usage Guidelines
NOTE: Devices in a VRRP group must be configured with the same authentication mode and authentication key; otherwise, the VRRP group cannot negotiate the Master and Backup states. |
Example
- Configure the authentication key in simple authentication mode for a VRRP group.
admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 authentication simple-key picos123 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.