/
run show evpn es

run show evpn es

The run show evpn es command is used to display the all the Ethernet segments configured on the device. It also displays the auto generated type-3 ESI for each segment, its type, the name of the LAG interface and the VTEPs involved.


Example:

admin@ACC2# run show evpn es
Type: B bypass, L local, R remote, N non-DF
ESI                               Type      ES-IF                   VTEPs
03:00:22:22:22:22:22:00:00:01      LR        ae1                   10.226.14.253,10.226.14.254
03:00:22:22:22:22:22:00:00:02      LR        ae2                   10.226.14.253,10.226.14.254


To check the detailed information of the Ethernet segments, add the optional keyword detail at the end of the command as shown below.

admin@ACC2# run show evpn es detail
ESI: 03:00:22:22:22:22:22:00:00:01
 Type: Local,Remote
 Interface: ae1
 State: up
 Bridge port: yes
 Ready for BGP: yes
 VNI Count: 2
 MAC Count: 0
 DF status: df
 DF preference: 32767
 Nexthop group: 536870913
 VTEPs:
     10.226.14.253 df_alg: preference df_pref: 32767 nh: 268435459
     10.226.14.254 df_alg: preference df_pref: 32767 nh: 268435460


ESI: 03:00:22:22:22:22:22:00:00:02
 Type: Local,Remote
 Interface: ae2
 State: up
 Bridge port: yes
 Ready for BGP: yes
 VNI Count: 2
 MAC Count: 0
 DF status: df
 DF preference: 32767
 Nexthop group: 536870914
 VTEPs:
     10.226.14.253 df_alg: preference df_pref: 32767 nh: 268435459
     10.226.14.254 df_alg: preference df_pref: 32767 nh: 268435460

Copyright © 2025 Pica8 Inc. All Rights Reserved.