set protocols bgp neighbor disable-connected-check

The set protocols bgp neighbor disable-connected-check command allows peerings between directly connected eBGP peers using loopback addresses.
The delete protocols bgp neighbor disable-connected-check command doesn't allow peerings between directly connected eBGP peers using loopback addresses.

Command Syntax

set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> | interface <interface>} disable-connected-check

delete protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> | interface <interface>} disable-connected-check

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
neighbor <ip>	Specifies the IPv4/IPv6 address of a peer.
peer-group <peer-group>	Specifies a peer group.
interface <interface>	Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.

Example
• This example allows peerings between directly connected eBGP peers using loopback addresses.

admin@XorPlus# set protocols bgp neighbor 2.2.2.2 disable-connected-check
admin@XorPlus# commit