set protocols bgp neighbor route-reflector-client

The set protocols bgp neighbor route-reflector-client command configures the router as a BGP route reflector and the specified peer as its client.
The delete protocols bgp neighbor route-reflector-client command disables this function.

Command Syntax

set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} route-reflector-client

delete protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} route-reflector-client

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
{ipv4-unicast\|ipv4-labeled-unicast\|ipv6-unicast\|ipv6-labeled-unicast}	Specifies the type of the address family.
neighbor <ip>	Specifies the IPv4/IPv6 address of a peer.
peer-group <peer-group>	Specifies a peer group.
interface <interface>	Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.

Example
• This example configures the router as a BGP route reflector and the specified peer as its client.

admin@XorPlus# set protocols bgp neighbor 2.2.2.2 ipv4-unicast route-reflector-client
admin@XorPlus# commit