set protocols bgp neighbor sender-as-path-loop-detection

The set protocols bgp neighbor sender-as-path-loop-detection command enables the detection of sender side AS path loops and filter the bad routes before they are sent. This setting is disabled by default.
The delete protocols bgp neighbor sender-as-path-loop-detection command removes the configuration.

Command Syntax

set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} sender-as-path-loop-detection

delete protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} sender-as-path-loop-detection

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
neighbor <ip>	Specifies the IPv4/IPv6 address of a peer.
peer-group <peer-group>	Specifies a peer group.
interface <interface>	Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.

Example
• This example enables the detection of sender side AS path loops and filter the bad routes before they are sent.

admin@XorPlus# set protocols bgp neighbor 2.2.2.2 sender-as-path-loop-detection
admin@XorPlus# commit