PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.3.3_Configuration_Guide
All content
Space settings
Content
Results will update as you type.
•
Release Notes for PICOS 4.3.3
Hardware Guides
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
Interface Configuration Commands
Port Security Commands
IPv6 Neighbor Discovery Protocol Command Reference
•
set l3-interface routed-interface ipv6-nd adv-interval-option
•
set l3-interface routed-interface ipv6-nd home-agent-config-flag
•
set l3-interface routed-interface ipv6-nd home-agent-lifetime
•
set l3-interface routed-interface ipv6-nd home-agent-preference
•
set l3-interface routed-interface ipv6-nd managed-config-flag
•
set l3-interface routed-interface ipv6-nd mtu
•
set l3-interface routed-interface ipv6-nd other-config-flag
•
set l3-interface routed-interface ipv6-nd prefix off-link
•
set l3-interface routed-interface ipv6-nd prefix preferred-lifetime
•
set l3-interface routed-interface ipv6-nd prefix router-address
•
set l3-interface routed-interface ipv6-nd prefix valid-lifetime
•
set l3-interface routed-interface ipv6-nd ra-fast-retrans
•
set l3-interface routed-interface ipv6-nd ra-interval
•
set l3-interface routed-interface ipv6-nd ra-lifetime
•
set l3-interface routed-interface ipv6-nd reachable-time
•
set l3-interface routed-interface ipv6-nd router-preference
•
set l3-interface routed-interface ipv6-nd suppress-ra
•
set l3-interface vlan-interface ipv6-nd adv-interval-option
•
set l3-interface vlan-interface ipv6-nd home-agent-config-flag
•
set l3-interface vlan-interface ipv6-nd home-agent-lifetime
•
set l3-interface vlan-interface ipv6-nd home-agent-preference
•
set l3-interface vlan-interface ipv6-nd managed-config-flag
•
set l3-interface vlan-interface ipv6-nd mtu
•
set l3-interface vlan-interface ipv6-nd other-config-flag
•
set l3-interface vlan-interface ipv6-nd prefix off-link
•
set l3-interface vlan-interface ipv6-nd prefix preferred-lifetime
•
set l3-interface vlan-interface ipv6-nd prefix router-address
•
set l3-interface vlan-interface ipv6-nd prefix valid-lifetime
•
set l3-interface vlan-interface ipv6-nd ra-fast-retrans
•
set l3-interface vlan-interface ipv6-nd ra-interval
•
set l3-interface vlan-interface ipv6-nd ra-lifetime
•
set l3-interface vlan-interface ipv6-nd reachable-time
•
set l3-interface vlan-interface ipv6-nd router-preference
•
set l3-interface vlan-interface ipv6-nd suppress-ra
Routed Interface
L3 Interface
•
interface aggregate-balancing hash-mapping field ethernet-destination-address disable
Uplink Failure Detection Commands
•
interface aggregate-balancing hash-mapping field ethernet-source-address disable
•
interface aggregate-balancing hash-mapping field ethernet-type disable
•
interface aggregate-balancing hash-mapping field ingress-interface disable
•
interface aggregate-balancing hash-mapping field ip-destination disable
•
interface aggregate-balancing hash-mapping field ip-protocol disable
•
interface aggregate-balancing hash-mapping field ip-source disable
•
interface aggregate-balancing hash-mapping field port-destination disable
•
interface aggregate-balancing hash-mapping field port-source disable
•
interface aggregate-balancing hash-mapping field vlan disable
•
set interface aggregate-ethernet
•
set interface aggregate-ethernet description
•
set interface aggregate-ethernet disable
•
interface aggregate-ethernet <lag_name> aggregated-ether-options flow-control
•
set interface aggregate-ethernet aggregated-ether-options lacp
•
interface aggregate-ethernet <lag_name> aggregated-ether-options min-selected-port
•
interface aggregate-ethernet <lag_name> backup-port delay
•
interface aggregate-ethernet <lag_name> backup-port interface
•
interface aggregate-ethernet <lag_name> backup-port mode
•
interface aggregate-ethernet <lag_name> crossflow enable
•
interface aggregate-ethernet <lag_name> crossflow local-control
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling egress
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ether-type
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ingress
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling mode
•
interface aggregate-ethernet <lag_name> family ethernet-switching native-vlan-id
•
set interface aggregate-ethernet family ethernet-switching port-mode
•
set interface aggregate-ethernet family ethernet-switching vlan members
•
interface aggregate-ethernet <lag_name> hash-mapping mode
•
interface aggregate-ethernet <lag_name> mtu
•
interface aggregate-ethernet <lag_name> snmp-trap
•
interface aggregate-ethernet <lag_name> static-ethernet-switching mac-address <macaddr> vlan
•
interface aggregate-ethernet <lag_name> storm-control <mode> pps
•
set interface bpdu-tunneling destination-mac
•
interface cut-through-mode
•
set interface ecmp hash-mapping field ingress-interface disable
•
set interface ecmp hash-mapping field ip-destination disable
•
set interface ecmp hash-mapping field ip-protocol disable
•
set interface ecmp hash-mapping field ip-source disable
•
set interface ecmp hash-mapping field port-destination disable
•
set interface ecmp hash-mapping field port-source disable
•
set interface ecmp hash-mapping field vlan disable
•
interface ecmp max-path
•
interface ethernet-switching-options buffer queue-limit
•
interface ethernet-switching-options mac-table-aging-time
•
interface gigabit-ethernet <port> backup-port delay
•
interface gigabit-ethernet <port> backup-port interface
•
interface gigabit-ethernet <port> backup-port mode
•
interface gigabit-ethernet <port> crossflow enable
•
interface gigabit-ethernet <port> crossflow local-control
•
interface gigabit-ethernet <port> description
•
interface gigabit-ethernet <port> disable
•
set interface gigabit-ethernet ether-options 802.3ad
•
interface gigabit-ethernet <port> ether-options flow-control
•
set interface gigabit-ethernet family ethernet-switching bpdu-tunneling protocol
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling egress
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ether-type
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ingress
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling mode
•
interface gigabit-ethernet <port> family ethernet-switching native-vlan-id
•
set interface gigabit-ethernet family ethernet-switching port-mode
•
set interface gigabit-ethernet family ethernet-switching vlan members
•
interface gigabit-ethernet <port> mtu
•
interface gigabit-ethernet <port> power-preemphasis-level
•
interface gigabit-ethernet <port> snmp-trap
•
set interface gigabit-ethernet speed
•
set interface gigabit-ethernet auto-speeds
•
interface gigabit-ethernet <port> static-ethernet-switching mac-address <mac-address> vlan <vlan-id>
•
interface gigabit-ethernet <port> storm-control <mode> pps
Show more below
Blogs
You‘re viewing this with anonymous access, so some content might be blocked.
Close
PICOS-4.3.3_Configuration_Guide
/
set l3-interface vlan-interface ipv6-nd prefix preferred-lifetime
set l3-interface vlan-interface ipv6-nd prefix preferred-lifetime
Tracy Yang (Unlicensed)
Owned by
Tracy Yang (Unlicensed)
Mar 03, 2023
Loading data...