set routing route-map set-action ipv6-next-hop

The set routing route-map set-action ipv6-next-hop command sets the IP address of the next-hop address or peer address of the route with the value configured in the action clause or keep unchanged.
The delete routing route-map set-action ipv6-next-hop command restores the default behavior of not modifying the IP address of the next-hop of the route.

Command Syntax

set routing route-map <route-map-name> order <NUMBER> set-action ipv6-next-hop {[global ipv6-addr <next-hop-address>] | [local ipv6-addr <next-hop-address>] | peer-address | prefer-global}

delete routing route-map <route-map-name> order <NUMBER> set-action ipv6-next-hop {[global ipv6-addr <next-hop-address>] | [local ipv6-addr <next-hop-address>] | peer-address | prefer-global}

Parameter

Parameter	Description
route-map <route-map-name>	Specifies the name of the route map. Required.
order <NUMBER>	Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535.
{[global ipv6-addr <next-hop-address>] \| [local ipv6-addr <next-hop-address>] \| peer-address \| prefer-global}	Specifies the IPv6 address to be set as the next-hop address or peer address of the route .

Example

Set the IP address of the peer address of the route with the value configured in the action clause.

admin@Xorplus# set routing route-map GlobalMap order 10 set-action ipv6-next-hop peer-address
admin@Xorplus# commit