set routing route-map match ipv4-addr route-source

The set routing route-map match ipv4-addr route-source command matches the source IP address prefix of the routes with one or more addresses in the prefix list.
The delete routing route-map match ipv4-addr route-source command restores the default behavior of not matching the source IP address prefix of the routes to their default value.

Command Syntax

set routing route-map <route-map-name> order <NUMBER> match ipv4-addr route-source prefix-list <prefix-list-v4>

delete routing route-map <route-map-name> order <NUMBER> match ipv4-addr route-source prefix-list <prefix-list-v4>

Parameter

Parameter	Description
route-map <route-map-name>	Specifies the name of the route map. Required.
<NUMBER>	Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535.
prefix-list <prefix-list-v4>	Specifies the name of the prefix list to be matched.

Example

Configure a match clause in the route map to match the source IP address prefix list P1.

admin@Xorplus# set routing route-map GlobalMap order 10 match ipv4-addr route-source prefix-list P1
admin@Xorplus# commit