MSTP Configuration Example
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
10 min read
Loading data...
There are two examples of MSTP configuration. In our first example, VLAN 100 is mapped to MSTI-1 and VLAN 200 is mapped to MSTI-2. The entire topology belongs to only one MSTP domain named region1. Switch A is the root of the network.Â
To achieve load balancing, VLAN 100 should be in MSTI-1 (Fig. 4-4), and VLAN 200 should be in MSTI-2 (Fig. 4-5). 
Â
Figure 4-3. MSTP configuration.Â
Â
Figure 4-4. MSTI-1 topology for VLAN 100.Â
Â
Figure 4-5. MSTI-2 topology for VLAN 200.
Configuring Switch A, Example 1
For Switch A, configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100 and VLAN 200.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100 admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp configuration-name region1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# To make sure that Switch A is the root of the network and the regional root of MSTI-1, configure it as the higher priority. admin@XorPlus# set protocols spanning-tree mstp bridge-priority 0 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# set protocols spanning-tree mstp msti 1 bridge-priority 4096 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch B, Example 1
Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100 and VLAN 200.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100 admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp configuration-name region1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To verify that Switch B is the regional root of MSTI-2 and that ge-1/1/2 and ge-1/1/3 are in blocking status in MSTI-1, configure a higher MSTI-2 priority and a large value for internal-path-cost in MSTI-1.
admin@XorPlus# set protocols spanning-tree mstp msti 2 bridge-priority 4096 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 10000000 admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/3 cost 10000000 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch C, Example 1
Configure ge-1/1/1~ge-1/1/2 as trunk ports and as members of VLAN 100 and VLAN 200.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100 admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp configuration-name region1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To set ge-1/1/1 and ge-1/1/2 in forwarding status in MSTI-1, configure a lower value for internal-path-cost.Â
To set ge-1/1/1 in blocking status in MSTI-2, configure a higher value for internal-path-cost.
admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/1 cost 1000 admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 1000 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/1 cost 100000 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch D, Example 1
Configure ge-1/1/1~ge-1/1/2 as trunk ports and as members of VLAN 100 and VLAN 200.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100 admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp configuration-name region1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To set ge-1/1/1 in blocking status in MSTI-2 and ge-1/1/2 in blocking status in MSTI-1, configure a large value for internal-path-cost.
admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/1 cost 10000000 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 10000000 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch E, Example 1
Configure ge-1/1/1~ge-1/1/2 as trunk ports and as members of VLAN 100 and VLAN 200.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100 admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp configuration-name region1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To set ge-1/1/1 and ge-1/1/2 in forwarding status in MSTI-2, configure a lower value for internal-path-cost.Â
To set ge-1/1/2 in blocking status in MSTI-1, configure a large value for internal-path-cost.
admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/1 cost 1000 admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/2 cost 1000 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 10000000 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
In the second example, there are two regions. In region 1, VLAN 100 is mapped to MSTI-1, VLAN 200 is mapped to MSTI-2, and VLAN 300 is mapped to MSTI-3. In region 2, VLAN 200 is mapped to MSTI-2 and VLAN 400 is mapped to MSTI-4. Switch A is the root of the entire network. The topologies of the VLANs are presented in Fig. 4-6 through 4-10. 
Figure 4-6. MSTP configuration.
Figure 4-7. Topology for VLAN 100.
Figure 4-8. Topology for VLAN 200.
Figure 4-9. Topology for VLAN 300.
Figure 4-10. Topology for VLAN 400.
Configuring Switch A, Example 2
For Switch A, configure ge-1/1/1~ge-1/1/2 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set vlans vlan-id 300 admin@XorPlus# set vlans vlan-id 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100 admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp msti 3 vlan 300 admin@XorPlus# set protocols spanning-tree mstp configuration-name region1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# To verify that Switch A is the root of the network and the regional root of MSTI-1, configure it as the higher priority. admin@XorPlus# set protocols spanning-tree mstp bridge-priority 0 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# set protocols spanning-tree mstp msti 1 bridge-priority 4096 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch B, Example 2
Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set vlans vlan-id 300 admin@XorPlus# set vlans vlan-id 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 400 admin@XorPlus# admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100 admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp msti 3 vlan 300 admin@XorPlus# set protocols spanning-tree mstp configuration-name region1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To verify that Switch B is the regional root of MSTI-2 and that ge-1/1/1 is in blocking status in MSTI-3, configure a higher MSTI-2 priority and a large value for internal-path-cost in MSTI-3.
admin@XorPlus# set protocols mstp msti 2 bridge-priority 4096 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols mstp msti 3 interface ge-1/1/1 cost 10000000 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch C, Example 2
Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set vlans vlan-id 300 admin@XorPlus# set vlans vlan-id 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 400 admin@XorPlus# admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 1 vlan 100 admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp msti 3 vlan 300 admin@XorPlus# set protocols spanning-tree mstp configuration-name region1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To verify that Switch C is the regional root of MSTI-3, ge-1/1/1 is in blocking status in MSTI-2, and ge-1/1/2 is in blocking status in MSTI-1, user should configure a higher MSTI-3 priority and large values for internal-path-costs of ge-1/1/1 in MSTI-2 and ge-1/1/2 in MSTI-1.
admin@XorPlus# set protocols spanning-tree mstp msti 3 bridge-priority 4096 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 2 interface ge-1/1/1 cost 10000000 admin@XorPlus# set protocols spanning-tree mstp msti 1 interface ge-1/1/2 cost 10000000 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch D, Example 2
Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set vlans vlan-id 300 admin@XorPlus# set vlans vlan-id 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 400 admin@XorPlus# admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp msti 4 vlan 400 admin@XorPlus# set protocols spanning-tree mstp configuration-name region2 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To verify that Switch D is the regional root of MSTI-2 and the root of CIST. Configure a higher MSTI-2 priority and bridge priority.
admin@XorPlus# set protocols spanning-tree mstp bridge-priority 16384 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# set protocols spanning-tree mstp msti 2 bridge-priority 4096 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Configuring Switch E, Example 2
Configure ge-1/1/1~ge-1/1/3 as trunk ports and as members of VLAN 100, VLAN 200, VLAN 300, and VLAN 400.
admin@XorPlus# set vlans vlan-id 100 admin@XorPlus# set vlans vlan-id 200 admin@XorPlus# set vlans vlan-id 300 admin@XorPlus# set vlans vlan-id 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 400 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching port-mode trunk admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 100 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 200 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 300 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching vlan members 400 admin@XorPlus# admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# admin@XorPlus# set protocols spanning-tree mstp msti 2 vlan 200 admin@XorPlus# set protocols spanning-tree mstp msti 4 vlan 400 admin@XorPlus# set protocols spanning-tree mstp configuration-name region2 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
To verify that Switch E is the regional root of MSTI-4. Configure a higher MSTI-4 priority.
admin@XorPlus# set protocols spanning-tree mstp msti 4 bridge-priority 4096 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Copyright © 2024 Pica8 Inc. All Rights Reserved.