Link Aggregation Control Protocol (LACP) Configuration
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read
Loading data...
LACP (802.3ad) provides the dynamic link aggregation function.
The LACPDU includes the LACP system priority, the system MAC, the port priority, and I.D. The port, included in the LACP LAG, will transmit the LACPDU to its neighbors.
The configuration of the LACP LAG is similar to that of the static LAG.
The min-selected-port label denotes that the LAG is up only when no fewer than the defined number of ports are up. Below, our defined number is 4.
Configuring LACP LAGs
admin@XorPlus# set interface aggregate-ethernet ae1 aggregated-ether-options lacp enable true admin@XorPlus# set interface aggregate-ethernet ae1 aggregated-ether-options min-selected-port 4 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 ether-options 802.3ad ae1 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 ether-options 802.3ad ae1 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 ether-options 802.3ad ae1 admin@XorPlus# set interface gigabit-ethernet ge-1/1/4 ether-options 802.3ad ae1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus#
Displaying LACP LAG Information
admin@XorPlus# run show interface aggregate-ethernet ae1 Physical interface: ae1, Enabled, Physical link is Down Interface index: 53 Port mode: access Description: Link-level type: Ethernet, MTU: 1514, Speed: Auto, Duplex: Auto Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled Interface flags: Hardware-Down SNMP-Traps Internal: 0x0 Current address: 60:eb:69:d2:9c:d7, Hardware address: 60:eb:69:d2:9c:d7 Traffic statistics: 5 sec input rate 0 bits/sec, 0 packets/sec 5 sec output rate 0 bits/sec, 0 packets/sec Input Packets............................0 Output Packets...........................0 Input Octets.............................0 Output Octets............................0 Aggregated link protocol: LACP Minimum number of selected ports: 4 Members Status Port Speed --------- ---------- ---------- ge-1/1/1 up(active) Auto ge-1/1/2 up(active) Auto ge-1/1/3 up(active) Auto ge-1/1/4 up(active) Auto
Copyright © 2024 Pica8 Inc. All Rights Reserved.