IPv6 Management Support

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

SNMP over IPv6

User can walk the SNMP model via IPv6 address.

SSH over IPv6

User can log in to the switch via IPv6 address. (Static IPv6 address for a management port can be configured.)

admin@XorPlus# set system management-ethernet eth0 ip-address ?
Possible completions:
<[Enter]> Execute this command
IPv4 IPv4 address or negotiated via DHCP, e.g. 192.168.1.2/24 or dhcp
IPv6 IPv6 address or negotiated via DHCP, e.g. fec0::10/64 or dhcp
admin@XorPlus# set system management-ethernet eth0 ip-gateway ?
Possible completions:
<[Enter]> Execute this command
IPv4 Configure the IPv4 gateway
IPv6 Configure the IPv6 gateway

Syslog over IPv6

User can send syslog via IPv6 address to remote server.

admin@XorPlus# set system syslog server-ip ?
Possible completions:
<IPv4> Remove syslog server
<IPv6> Remove syslog server for IPv6

NTP Client IPv6

User can synchronize the time via IPv6 address.

admin@XorPlus# set system ntp-server-ip ?
Possible completions:
<IPv4> Sync time with NTP server <IP>
<IPv6> Sync time with NTP server <IPv6>

DNS Client IPv6

User can configure an IPv6 dns server IP address.

admin@XorPlus# set system dns-server-ip ?
Possible completions:
<IPv4> DNS server IP address <IP>
<IPv6> DNS server IPv6 address <IP>

DHCPv6 Client

PicOS supports dhcpv6 function.


Radius over IPv6

User can configure an IPv6 address for the radius server.

admin@XorPlus# set system aaa radius authorization server-ip ?
Possible completions:
<IPv4> Radius authorization IPv4 server address
<IPv6> Radius authorization IPv6 server address

Copyright © 2024 Pica8 Inc. All Rights Reserved.