set l3-interface routed-interface ipv6-nd other-config-flag

Run the command set l3-interface routed-interface ipv6-nd other-config-flag to set the other config flag in RA packets. This flag indicates to hosts that administered or stateful protocol should be used for autoconfiguration information other than addresses. This flag is not set by default.

Run the command delete l3-interface routed-interface ipv6-nd other-config-flag to unset this flag in RA packets.

Command Syntax

set l3-interface routed-interface <interface-name> ipv6-nd other-config-flag

delete l3-interface routed-interface <interface-name> ipv6-nd other-config-flag

Parameters

Parameter	Description
routed-interface <interface-name>	Specifies a routed interface name or sub-interface name. The value is a string.

Example

This example sets the other config flat in RA packets.

admin@XorPlus# set l3-interface routed-interface rif-te4 ipv6-nd other-config-flag
admin@XorPlus# commit