interface aggregate-ethernet <lag_name> storm-control <mode> pps

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

Users can set storm control mode for a specified port.


Command Syntax
set interface aggregate-ethernet <lag_name> storm-control <mode> pps <value>
delete interface aggregate-ethernet <lag_name> storm-control broadcast pps


Parameter
• <lag_name> Name of LAG interface.
• <mode> packets forwarding mode

  • broadcast Storm control for broadcast traffic
  • multicast Storm control for multicast traffic
  • unicast Storm control for unicast traffic

•<value> Packets per second, [0..30000000]


Example
• This example set broadcast storm control for ae1:

admin@XorPlus# set interface aggregate-ethernet ae1 storm-control broadcast pps 1000
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.