·System LED Definition:
Feature | Detailed Description | Comment |
---|
Power LED | - Off = No power
- Solid Amber = POST in process
- Blinking Amber = Power Supply failed
- Solid Green = Normal
| At front side |
FAN LED | - Solid green –fan powered and @expected rpm
- Solid yellow –fan failed including incompatible airflow direction
                    from what is indicated in the Board ID for the particular                    SKU.
| At front side |
PSU LED | - Solid green – The DC output is on and OK .
- Solid yellow– Power supply critical event causing a shutdown; failure,
                    OCP, OVP, Fan Fail, OTP,UVP . - Blinking yellow–Power supply warning events where the power
                        supply continues to operate; high temp (PMBus                         reading inlet > 60deg; PMBus reading hotspot                         > 100deg), high power, high current (105 %*),                         slow fan.
|
At the rear side |
MASTER LED | Not supported. | At front side |
LOCATED LED | Not supported. | At front side |
7-DIGIT Stack LED | Not supported. | At front side |
Health LED | Not supported. | At front side |
·SFP+ port LED Definition:
Feature | Detailed Description | Comment |
---|
Link LED | - Off – No Link
- Solid green – Link on 10G speed
- Solid amber – Link on 1G speed
|
|
Activity LED | - Off – No Link
- Blinking green – Transmit/Receive is activity
|
|
·QSFP+ port LED Definition:
Feature | Detailed Description | Comment |
---|
Link/ACT LED | - Off – No Link
- Solid green – Link on 40G speed
- Solid Amber- Link on 10G speed
- Blinking green – 40G speed ,transmit/Receive is activity
- Blinking amber – 10G speed ,transmit/Receive is activity
|
|
·Front Management Ethernet port LED Definition:
Feature | Detailed Description | Comment |
---|
Link LED | - Off – No Link
- Solid green – Link on 1G speed
- Solid yellow – Link on 10M/100M speed
|
|
Activity | - Off – No Link
- Blinking green – Transmit/Receive is activity
|
|