set vlans voice-vlan dscp

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set vlans voice-vlan dscp command modifies the DSCP value for the voice VLAN.


Command Syntax

set vlans voice-vlan dscp <dscp-value>


Parameter

Parameter

Description

dscp <dscp-value>

Specifies the DSCP value for the voice VLAN.

The value is an integer that ranges from 0 to 63.


Usage Guidelines

Differentiated Services Code Point (DSCP) value is used to provide Diff-Serv (Differentiated Service) node behavior for the specified application type as defined in IETF RFC 2474. This 6 bit field may contain one of 64 code point values (0 through 63). The six bits Type of Service (TOS) field in the IPv4 data packet header are used for DSCP.


Example

  •   Configure the DSCP value to 50 for the voice VLAN.
admin@Xorplus# set vlans voice-vlan dscp 50
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.