set protocols igmp-snooping vlan-id querier version

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set protocols igmp-snooping vlan-id querier version command configures the IGMP message version that the querier can support.


Command Syntax

set protocols igmp-snooping vlan-id <vlan-id> querier version <querier-version>


Parameter

Parameter

Description

vlan-id <vlan-id>

Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.

querier version <querier-version>

Specifies the IGMP message version that the querier supports. The value is 1 or 2.

  •    1: indicates that the querier processes only IGMPv1 messages.
  •    2: indicates that the querier processes IGMPv1 and IGMPv2 messages.

The default value is 2.


Example

  •   Configure the IGMP snooping querier version.
admin@XorPlus# set protocols igmp-snooping vlan-id 2 querier version 1 
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.