set protocols igmp interface query-interval

The set protocols igmp interface query-interval command sets the interval at which an L3 interface sends IGMP General Query messages.

Command Syntax
set protocols igmp interface <interface-name> query-interval <query-interval>

delete protocols igmp interface <interface-name> query-interval

Parameter

Parameter	Description
interface <interface-name>	Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name. The value is a string.
query-interval <query-interval>	Specifies the interval at which an interface sends IGMP General Query messages. The value is an integer that ranges from 1 to 1800, in seconds.

Usage Guidelines

An IGMP querier sends IGMP General Query messages at an interval to check whether a local network segment has group members. This interval is the general query interval. You can set the general query interval based on situations on your network.

Example
• Configure the interval at which an interface sends IGMP General Query messages to 50 seconds on vlan2.

admin@XorPlus# set protocols igmp interface vlan2 query-interval 50
admin@XorPlus# commit