set protocols igmp-snooping vlan-id mvr receiver vlan-list

The set protocols igmp-snooping vlan-id mvr receiver vlan-list command configure the MVR mapped VLAN IDs on the access ports.

The delete protocols igmp-snooping vlan-id mvr receiver vlan-list command deletes the configuration.

Command Syntax

set protocols igmp-snooping vlan-id <vlan-id> mvr receiver vlan-list <vlan-range-string>

delete protocols igmp-snooping vlan-id <vlan-id> mvr receiver vlan-list

Parameters

Parameter	Description
<vlan-id>	The multicast MVR VLAN ID.
<vlan-range-string>	The mapped receiver VLAN list for the given MVLAN.

Usage Guidelines

The IGMP query packets and stream traffic from the upstream port is updated to different VLAN ID in the vlan-list of the above configuration command. On the reverse direction, the IGMP report packets with the VLAN ID in the vlan-list are translated to the MVLAN accordingly.

The upstream traffic will go the trunk ports which have the VLAN ID as MVLAN.

Example

Configure the receiver VLAN range as 101-199 for MVLAN 100.

admin@PICOS# set protocols igmp-snooping vlan-id 100 mvr receiver vlan-list 101-199
admin@PICOS# commit