run show dot1x all
The run show dot1x all command displays the NAC information.
Command Syntax
run show dot1x all
Parameter
None.
Example
- Run run show dot1x all command to view the NAC information.
admin@Xorplus# run show dot1x all Global-Info: --------------------------------------------------------------------------------- NAS-IP : 10.10.1.1 Block-VLAN : 2 Block-VLAN-IP : 172.16.1.1/24 WEB-AUTH-MODE : Remote Server-Fail-VLAN : 100 ---------------------------------------------------------------------------------
Table 1Â Description of the run show dot1x all command output
Item | Description |
NAS-IP | Indicates the NAS IP address which is set to the L3 VLAN interface IP connected to the RADIUS server. |
Block-VLAN | Indicates the VLAN ID for block VLAN. |
Block-VLAN-IP | Indicates the IP address of the L3 block VLAN interface. |
WEB-AUTH-MODE | Indicates the Web authentication mode, the value is Remote. |
Server-Fail-VLAN | Indicates the VLAN to which the user ports will be added to when all the configured RADIUS servers are unreachable. |
Copyright © 2024 Pica8 Inc. All Rights Reserved.