set protocols dot1x aaa vrf mgmt-vrf
The set protocols dot1x aaa vrf mgmt-vrf command configures to run the 802.1X protocols in the management VRF.
Command Syntax
set protocols dot1x aaa vrf mgmt-vrf
Parameter
None.
Usage Guidelines
802.1X protocol runs in the default VRF by default, and supports to be configured in the management VRF. The corresponding AAA server is required to be route reachable in the VRF running 802.1X protocol.
Using this command to modify the VRF where to run the 802.1X service does not affect users who are currently authenticated successfully and online, it will only affect users who need to do DOT1X authentication later.
Note: The latest configuration overrides the previous one.
Example
- Configure the 802.1X protocols to run in the management VRF.
admin@Xorplus# set protocols dot1x aaa vrf mgmt-vrf admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.