/
run show system hwinfo
run show system hwinfo
The run show system hwinfo command displays the hardware information of PICOS switch.
Command Syntax
run show system hwinfo
Parameter
None.
Exampe
- Display the hardware information of PICOS switch.
admin@Xorplus# run show system hwinfo Product Name: N3208PX-ON Part Number: 0JDFTF Serial Number: CN0JDFTFDND0083M0100 Base MAC Address: 20:04:0F:01:63:47 Manufacture Date: 02/22/2020 14:50:07 Device Version: 1 Label Revision: A00 Platform Name: armv7a-dellemc_n3208px_iproc-r0 Loader Version: 4.39.1.0-4 MAC Addresses: 128 Manufacturer: DND00 Country Code: CN Vendor Name: Dell EMC Diag Version: 4.39.3.0-1 Service Tag: 8VMGXC2 Vendor Extension: 0x00 0x00 0x02 0xA2 CRC-32: 0x4260903C(Valid) admin@Xorplus# run show system hwinfo service-tag Service Tag: 8VMGXC2
, multiple selections available,
Related content
run show system hwinfo
run show system hwinfo
More like this
run show system hwinfo
run show system hwinfo
More like this
run show system hwinfo
run show system hwinfo
More like this
run show system hwinfo
run show system hwinfo
More like this
run show system hwinfo
run show system hwinfo
More like this
run show system hwinfo
run show system hwinfo
More like this
Copyright © 2025 Pica8 Inc. All Rights Reserved.