set system inband routed-interface
The set system inband routed-interface command sets a specified routed interface or sub-interface in the default VRF as the inband management port.
Command Syntax
set system inband routed-interface <routed-interface>
Parameter
Parameter | Description |
routed-interface <routed-interface> | Enables inband management on a specfied routed interface or sub-interface in the default VRF. The value is a string. |
Usage Guidelines
By default, the user cannot remotely log in and manage the switch through the routed interface or sub-interface.
Use this command to set a specified routed interface or sub-interface in the default VRF as the inband management port. The routed interface or sub-interface with the inband management function enabled can transmit both management traffic and data plane traffic.
NOTE:  Only the routed interface or sub-interface in the default VRF can be set as the inband management port. If a routed interface or sub-interface has been set as an inband management port, it cannot be bound to other user-defined VRFs. |
Example
- Â Enable the inband management function of the routed interface.
admin@Xorplus# set system inband routed-interface rif-te1 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.