set interface ufd link-to-monitor

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set interface ufd link-to-monitor command configures the uplink interface to an uplink failure detection group.

The delete interface ufd link-to-monitor command deletes the configuration.


Command Syntax

set interface ufd <ufd-group-name> link-to-monitor <interface-name>


Parameter

Parameter

Description

ufd <ufd-group-name>

Specifies the UFD group name. The value is a string in alpha-numeric format with no spaces.

link-to-monitor <interface-name>

Specifies the uplink interface to a UFD group. The value is a physical interface or a LAG interface.


Example

  • Configure the uplink interface to an uplink failure detection group.
admin@Xorplus# set interface ufd ufd1 link-to-monitor ge-1/1/2
admin@Xorplus# commit




Copyright © 2024 Pica8 Inc. All Rights Reserved.