show interface aggregate-ethernet <lag_name>

This command is to show information about the specified LAG interface.

Command Syntax
run show interface aggregate-ethernet <lag_name> [text]

Parameter
•<lag_name> Name of LAG interface.
• [text] The special information. Options include:

brief Show brief information
detail Show detail information

Example
• This example is to show information of ae1:

admin@XorPlus# run show interface aggregate-ethernet ae1 
Physical interface: ae1, Enabled, error-discard False, Physical link is Down
Interface index: 53
Port mode: access
Description: 
Link-level type: Ethernet, MTU: 1514, Speed: Auto, Duplex: Auto
Source filtering: Disabled, Flow control: Disabled, Auto-negotiation: Enabled
Interface flags: Hardware-Down SNMP-Traps Internal: 0x0
Current address: 08:9e:01:a8:00:49, Hardware address: 08:9e:01:a8:00:49
Traffic statistics:
5 sec input rate 0 bits/sec, 0 packets/sec
5 sec output rate 0 bits/sec, 0 packets/sec
Input Packets............................0
Output Packets...........................0
Input Octets.............................0
Output Octets............................0
Aggregated link protocol: STATIC
Minimum number of selected ports: 1
Members Status Port Speed
--------- ---------- ----------