set protocols ospf6 distance

Owned by Tracy Yang
Nov 13, 2023

The command set protocols ospf6 distance configures the administrative distance for an entire group of OSPFv3 routes.

Run the command delete protocols ospf6 distance to remove this configuration from the switch.


Command Syntax

set protocols ospf6 [vrf <vrf-name>] distance <distance>

delete protocols ospf6 [vrf <vrf-name>] distance <distance>

Parameters

ParameterDescription
vrf <vrf-name>Optional. Specifies the name of the VRF for the OSPFv3 instance.
distance <distance>Specifies the administrative distance, the value is an integer that ranges from 1 to 255

Example

  • This example configures the administration distance of OSPF routes to 140.
admin@XorPlus# set protocols ospf6 distance 140


Copyright © 2024 Pica8 Inc. All Rights Reserved.