set l3-interface loopback disable
The set l3-interface loopback disable command can be used to enable or disable a loopback interface.
Command Syntax
set l3-interface loopback <interface-name> disable <true | false>
Parameters
Parameter | Description |
loopback <interface-name> | Specifies the name of the loopback interface. The value is a string. |
disable <true | false> | Enables or disables the loopback interface. The value could be true or false.
When a loopback interface is created, it is enabled by default. |
Example
- Disable loopback interface lo2.
admin@Xorplus# set l3-interface loopback lo2 disable true admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.