show interface diagnostics optics all

This command is to show diagnostics informations of all interface or a specified interface.

Command Syntax
run show interface diagnostics optics [all | <interface-name>]

Example
• This example is to show diagnostics informations:

admin@Xorplus# run show interface diagnostics optics all
Interface       Temp(C/F)    Voltage(V)  Bias(mA)  Tx Power(dBm)  Rx Power(dBm)  Module Type
--------------  -----------  ----------  --------  -------------  -------------  -----------
te-1/1/1(49)    27.78/82.00  3.27        6.88      -3.38          -20.00         10G_BASE_SR 


admin@Xorplus# run show interface diagnostics optics te-1/1/1
Interface       Temp(C/F)    Voltage(V)  Bias(mA)  Tx Power(dBm)  Rx Power(dBm)  Module Type
--------------  -----------  ----------  --------  -------------  -------------  -----------
te-1/1/1(49)    27.78/82.00  3.27        6.88      -3.38          -20.00         10G_BASE_SR

The number (49) with the interface name is the physical port label of the interface.

PICOS-4.4.3_Configuration_Guide

show interface diagnostics optics all

Analytics

Related content