set interface aggregate-ethernet aggregated-ether-options lacp fallback enable

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set interface aggregate-ethernet aggregated-ether-options lacp fallback enable command can be used to enable or disable LACP fallback mode on a LAG interface.


Command Syntax

set interface aggregate-ethernet <lag-interface> aggregated-ether-options lacp fallback enable <true | false>


Parameters

Parameter

Description

aggregate-ethernet <lag-interface>

Specifies the LAG interface name. The value is a string like ae1, ae99 and so on.

NOTE:

LACP fallback can only be applied on the LACP LAG interface, but not on a static LAG.

enable <true | false>

Enable or disable LACP fallback feature.

  • true: Enable LACP fallback feature.
  • false: Disable LACP fallback feature.


Example

  • Enable LACP fallback feature on LAG interface ae1.
admin@Xorplus# set interface aggregate-ethernet ae1 aggregated-ether-options lacp fallback enable true


Copyright © 2024 Pica8 Inc. All Rights Reserved.